LP2975IMM-3.3
- Created at: 2023-11-01 09:22:51 , by WikiIC
- Updated at: 2023-11-01 09:22:51
- Views: 9
LP2975IMM-3.3
Overview
Product Category
LP2975IMM-3.3 belongs to the category of integrated voltage regulators.
Use
The LP2975IMM-3.3 is primarily used for regulating voltage in electronic circuits.
Characteristics
- Integrated voltage regulator
- Regulates voltage to a constant 3.3V output
- Small form factor (package)
- High efficiency
- Low dropout voltage
Package and Quantity
LP2975IMM-3.3 is available in a small outline, surface-mount package. The package type is SOT-23. It is typically sold in reels or tubes containing multiple units.
Specifications
- Input Voltage Range: 2.7V to 10V
- Output Voltage: 3.3V
- Maximum Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 75µA (typical)
- Operating Temperature Range: -40°C to +125°C
Pin Configuration
The LP2975IMM-3.3 has three pins: 1. VIN (Input Voltage) 2. GND (Ground) 3. VOUT (Output Voltage)
Functional Features
- Low dropout voltage allows for efficient regulation even with low input voltages.
- Built-in thermal shutdown protection prevents damage due to excessive heat.
- Short-circuit current limit protects the device and the circuit from overcurrent conditions.
- Low quiescent current ensures minimal power consumption when the device is not actively regulating voltage.
Advantages
- Small form factor makes it suitable for space-constrained applications.
- High efficiency results in less power dissipation and longer battery life.
- Wide input voltage range allows for flexibility in various applications.
- Thermal shutdown protection enhances reliability and safety.
Disadvantages
- Limited maximum output current may not be suitable for high-power applications.
- Dropout voltage of 200mV may affect performance in low voltage scenarios.
Working Principles
The LP2975IMM-3.3 operates by comparing the output voltage to a reference voltage and adjusting the internal circuitry to maintain a constant 3.3V output. It utilizes a feedback mechanism to continuously monitor and regulate the output voltage.
Application Field Plans
The LP2975IMM-3.3 is commonly used in various electronic devices, including: 1. Battery-powered devices such as portable audio players and handheld gaming consoles. 2. IoT (Internet of Things) devices requiring stable voltage supply. 3. Embedded systems and microcontroller-based projects. 4. Automotive electronics, where regulated voltage is crucial for reliable operation.
Alternative Models
- LM1117-3.3: Similar voltage regulator with higher maximum output current (800mA).
- MCP1700-3302E/TO: Low dropout voltage regulator with similar specifications.
- TPS73633DBVR: Ultra-low quiescent current regulator with comparable output voltage.
Note: The above alternative models are provided as examples and may have different package types or additional features.
In conclusion, the LP2975IMM-3.3 is an integrated voltage regulator that provides efficient and reliable voltage regulation at a constant 3.3V output. Its small form factor, wide input voltage range, and low dropout voltage make it suitable for various electronic applications. However, its limited maximum output current and dropout voltage may restrict its use in certain high-power or low voltage scenarios.
List 10 common questions and answers related to the application of LP2975IMM-3.3 in technical solutions
Sure! Here are 10 common questions and answers related to the application of LP2975IMM-3.3 in technical solutions:
Q: What is LP2975IMM-3.3? A: LP2975IMM-3.3 is a low-dropout (LDO) voltage regulator IC that provides a fixed output voltage of 3.3V.
Q: What is the input voltage range for LP2975IMM-3.3? A: The input voltage range for LP2975IMM-3.3 is typically between 2.7V and 7V.
Q: What is the maximum output current of LP2975IMM-3.3? A: LP2975IMM-3.3 can provide a maximum output current of 500mA.
Q: Can LP2975IMM-3.3 be used in battery-powered applications? A: Yes, LP2975IMM-3.3 is suitable for battery-powered applications due to its low dropout voltage and low quiescent current.
Q: Does LP2975IMM-3.3 require any external components for operation? A: Yes, LP2975IMM-3.3 requires an input capacitor and an output capacitor for stable operation.
Q: Is LP2975IMM-3.3 protected against overcurrent and thermal shutdown? A: Yes, LP2975IMM-3.3 includes built-in protection features such as overcurrent protection and thermal shutdown.
Q: Can LP2975IMM-3.3 be used in automotive applications? A: Yes, LP2975IMM-3.3 is designed to meet automotive specifications and can be used in automotive applications.
Q: What is the dropout voltage of LP2975IMM-3.3? A: The typical dropout voltage of LP2975IMM-3.3 is 200mV at 500mA load current.
Q: Can LP2975IMM-3.3 be used in low-power IoT devices? A: Yes, LP2975IMM-3.3 is suitable for low-power IoT devices due to its low quiescent current and low shutdown current.
Q: Is LP2975IMM-3.3 available in different package options? A: Yes, LP2975IMM-3.3 is available in a small SOT-23 package, which is suitable for space-constrained applications.
Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for accurate information.
- https://chipmlcc.ru/product/details/texas-instruments/lp2975imm-3-3-4914535.html [PDF download, circuit diagram, pin configuration, detailed specifications, and more electronic component spot channels.]
- https://www.chipmlcc.com/product/details/texas-instruments/lp2975imm-3-3-4914535.html [PDF download, circuit diagram, pin configuration, detailed specifications, and more electronic component spot channels.]
- Audio Special Purpose
- Clock/Timing - Application Specific
- Clock/Timing - Clock Buffers, Drivers
- Clock/Timing - Clock Generators, PLLs, Frequency Synthesizers
- Clock/Timing - Delay Lines
- Clock/Timing - IC Batteries
- Clock/Timing - Programmable Timers and Oscillators
- Clock/Timing - Real Time Clocks
- Data Acquisition - ADCs/DACs - Special Purpose
- Data Acquisition - Analog Front End (AFE)
- Data Acquisition - Analog to Digital Converters (ADC)
- Data Acquisition - Digital Potentiometers
- Data Acquisition - Digital to Analog Converters (DAC)
- Data Acquisition - Touch Screen Controllers
- Embedded - CPLDs (Complex Programmable Logic Devices)
- Embedded - DSP (Digital Signal Processors)
- Embedded - FPGAs (Field Programmable Gate Array)
- Embedded - FPGAs (Field Programmable Gate Array) with Microcontrollers
- Embedded - Microcontroller, Microprocessor, FPGA Modules
- Embedded - Microcontrollers
- Embedded - Microcontrollers - Application Specific
- Embedded - Microprocessors
- Embedded - PLDs (Programmable Logic Device)
- Embedded - System On Chip (SoC)
- Interface - Analog Switches - Special Purpose
- Interface - Analog Switches, Multiplexers, Demultiplexers
- Interface - CODECs
- Interface - Controllers
- Interface - Direct Digital Synthesis (DDS)
- Interface - Drivers, Receivers, Transceivers
- Interface - Encoders, Decoders, Converters
- Interface - Filters - Active
- Interface - I/O Expanders
- Interface - Modems - ICs and Modules
- Interface - Modules
- Interface - Sensor and Detector Interfaces
- Interface - Sensor, Capacitive Touch
- Interface - Serializers, Deserializers
- Interface - Signal Buffers, Repeaters, Splitters
- Interface - Signal Terminators
- Interface - Specialized
- Interface - Telecom
- Interface - UARTs (Universal Asynchronous Receiver Transmitter)
- Interface - Voice Record and Playback
- Linear - Amplifiers - Audio
- Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
- Linear - Amplifiers - Special Purpose
- Linear - Amplifiers - Video Amps and Modules
- Linear - Analog Multipliers, Dividers
- Linear - Comparators
- Linear - Video Processing
- Logic - Buffers, Drivers, Receivers, Transceivers
- Logic - Comparators
- Logic - Counters, Dividers
- Logic - FIFOs Memory
- Logic - Flip Flops
- Logic - Gates and Inverters
- Logic - Gates and Inverters - Multi-Function, Configurable
- Logic - Latches
- Logic - Multivibrators
- Logic - Parity Generators and Checkers
- Logic - Shift Registers
- Logic - Signal Switches, Multiplexers, Decoders
- Logic - Specialty Logic
- Logic - Translators, Level Shifters
- Logic - Universal Bus Functions
- Memory
- Memory - Batteries
- Memory - Configuration Proms for FPGAs
- Memory - Controllers
- PMIC - AC DC Converters, Offline Switchers
- PMIC - Battery Chargers
- PMIC - Battery Management
- PMIC - Current Regulation/Management
- PMIC - Display Drivers
- PMIC - Energy Metering
- PMIC - Full, Half-Bridge Drivers
- PMIC - Gate Drivers
- PMIC - Hot Swap Controllers
- PMIC - Laser Drivers
- PMIC - LED Drivers
- PMIC - Lighting, Ballast Controllers
- PMIC - Motor Drivers, Controllers
- PMIC - OR Controllers, Ideal Diodes
- PMIC - PFC (Power Factor Correction)
- PMIC - Power Distribution Switches, Load Drivers
- PMIC - Power Management - Specialized
- PMIC - Power Over Ethernet (PoE) Controllers
- PMIC - Power Supply Controllers, Monitors
- PMIC - RMS to DC Converters
- PMIC - Supervisors
- PMIC - Thermal Management
- PMIC - V/F and F/V Converters
- PMIC - Voltage Reference
- PMIC - Voltage Regulators - DC DC Switching Controllers
- PMIC - Voltage Regulators - DC DC Switching Regulators
- PMIC - Voltage Regulators - Linear
- PMIC - Voltage Regulators - Linear + Switching
- PMIC - Voltage Regulators - Linear Regulator Controllers
- PMIC - Voltage Regulators - Special Purpose
- Specialized ICs
- ClockTiming - Application Specific
- ClockTiming - Clock Buffers, Drivers
- ClockTiming - Clock Generators, PLLs, Frequency Synthesizers
- ClockTiming - Delay Lines
- ClockTiming - IC Batteries
- ClockTiming - Programmable Timers and Oscillators
- ClockTiming - Real Time Clocks
- Data Acquisition - ADCsDACs - Special Purpose
- Embedded - Microcontroller or Microprocessor Modules
- Interface - IO Expanders
- PMIC - Current RegulationManagement
- PMIC - VF and FV Converters
- PMIC - Voltage Regulators - Linear Transistor Driver